Avocent MERGEPOINT SP MANAGER User Manual

reset_cmd = reset
sensors_cmd = {
command = fans
command = temps
command = volts
}
sel_cmd = {
command = readlog -f
repeat = readlog
until = [\n\r]*(There are no more entries in the event log.)
}
clearsel_cmd = clearlog
devconsole_cmd = console 2
devconsole_esc = \033.
ignore = {
ignore = (There are no more entries in the event log.)[\n\r]*
}
Appendices 217

Avocent MERGEPOINT SP MANAGER Specifications

General

Brand	Avocent
Model	MERGEPOINT SP MANAGER
Category	Network Hardware
Language	English