Need help?Do you have a question about the AVPro Edge MXNet 1G and is the answer not in the manual?
Defines icons used for safety notes, tips, cautions, and warnings.
Details measures to avoid electrical hazards during installation and operation.
Advises on safe handling procedures requiring multiple installers.
Overview of AC-MXNET-1G-E, -EV2, -E-AVDM, -EWP, -D, -DV2 models.
Details enhancements in AC-MXNET-1G-EV2 and AC-MXNET-1G-DV2.
Explains the audio downmixing feature of the AVDM encoder.
Describes the role of AC-MXNET-CBOX and Mentor for system control.
Introduces AC-MXNET-SW10, SW24, SW48 network switches.
Lists prerequisites and helpful tips for system setup.
Provides guidelines for quality cabling and termination.
Discusses compatibility and integration with external control systems.
Details required IGMPv2 features like snooping and querier.
Explains MTU settings for jumbo Ethernet frames support.
Covers PoE power requirements and disabling EEE.
Describes front and rear panel connections and features for these encoders.
Details the front and rear panel connections for the EWP encoder.
Describes front and rear panel connections and features for these decoders.
Details the front and rear panel connections and functions of the CBOX.
Details the front and rear panel connections and features of the SW10 switch.
Details the front and rear panel connections and features of the SW24 switch.
Details the front and rear panel connections and features of the SW48 switch.
Explains RJ-45 Ethernet port usage for LAN, control, and AV network.
Details compatibility, installation, and types of SFP/SFP+ modules.
Covers DAC cable usage and considerations for HDMI cables.
Describes connections for USB, RS-232 serial, and IR signals.
Details analog audio ports and AC power connection requirements.
Step-by-step guide to connect encoders, decoders, and CBOX to the network.
Instructions for configuring devices for direct encoder-decoder connections.
Guides on how to stack SW24 and SW48 switches for increased capacity.
Steps to locate the CBOX IP and access the Mentor login page.
Overview of the interface layout and navigation methods.
Configuration for LAN/AV network and firmware updates for devices.
Managing system events, device events, and user access permissions.
Tools for configuring encoder sources and decoder destinations.
Interface for creating and managing matrix switching configurations.
Tools for creating standard and mosaic video walls.
Building RS-232, IR, and CEC commands for device control.
Routing video, audio, and IR signals separately between devices.
Setting up USB/KVM routing paths and KVM roaming groups.
Uploading custom logos and images for displays.
Viewing system events, logs, and time synchronization settings.
Instructions for ensuring reliable operation and safety during maintenance.
Conditions indicating when devices need qualified repair.
Details on how to contact AVPro Technical Support for assistance.
Explains the 10-year warranty, coverage start, and basic terms.
Covers red tape, damage causes, liability limits, and obsolescence.
Procedures for requesting an RMA and shipping details for returns.
General| Brand | AVPro Edge |
|---|---|
| Model | MXNet 1G |
| Category | Media Converter |
| Language | English |
To Next Page