AVPro Edge MXNet 1G - Important Safety Instructions; Safety Classifications in this Document; Electrical Shock Prevention; Weight Injury Prevention

Page 6 of 78
MXNET 1G USER MANUAL
IMPORTANT SAFETY INSTRUCTIONS
Prior to installing, configuring, and operating all MXNet devices and other vendor equipment, AVPro Edge
recommends that each dealer, integrator, installer, and all other necessary personnel access and read all
the required technical documentation, which can be located by visiting AVProEdge.com
.
Read and understand all safety instructions, cautions, and warnings in this document and the
labels on the equipment.
Safety Classifications in this Document
NOTE:
Provides special information for installing, configuring, and operating the
devices.
TIP:
Provides suggestions and considerations for installing, configuring, and
operating the devices.
IMPORTANT:
Provides special information that is critical for installing, configuring, and
operating the equipment.
CAUTION:
Provides special information for avoiding situations that may cause damage
to the devices.
WARNING:
Provides special information for avoiding situations that may cause physical
danger to the installer, end user, etc.
Electrical Shock Prevention
ELECTRICAL SHOCK:
The source power poses an electrical shock hazard that can potentially cause serious injury to installers and end
users.
ELECTRICAL DISCONNECT:
The source power outlet and power supply input power sockets should be easily accessible to disconnect power in
the event of an electrical hazard or malfunction.
Weight Injury Prevention
WEIGHT INJURY:
Installing some of the MXNet devices requires two installers to ensure safe handling during installation. Failure to
use two installers may result in injury.