Page 22 of 78
Connects to a variety of devices including control CPUs, DSPs, and the
MXNet network switches, AC-MXNET-SW10, AC-MXNET-SW24, and
AC-MXNET-SS48
NOTE: For advanced network data tracking, one of Ports 2-7 must be
directly connected to the MGMT port on the network switch (applies only to
the AC-MXNET-SW24 and AC-MXNET-SW48). Connect any of Ports 2-7 to
the MGMT port on the MXNet network switch to track switch performance
and data usage with the Mentor web UI.
8-pin RJ-45 female connector port
• Supports standard PoE power, IEEE 802.3AF (15.4 W)
• Connects to any 1GbE port on the MXNet network switch to provide
PoE to the CBOX and Mentor control connection to the encoders and
3-pin terminal block connector port
• System control port for MXNet using RS-232
DC 12V/1A locking ring power charger to locally power the CBOX
• Not required when connecting the CBOX to a network switch that
To Next Page
Loading...