Page 46 of 78
9 OSD (Onscreen Display)
Toggle button, allows a display to show a red text overlay listing the decoder’s custom name,
MAC and IP addresses, and the currently selected encoder’s custom name.
10 FIRMWARE VERSION
Shows the version of firmware currently installed on the decoder. This can be updated on the
System Utilities page under the MXNet Decoders (Rx) Updates section.
11 CHIPSET
Shows the current chipset version of the decoder.
12 LIGHTS CONTROL
Toggle button, allows for control of the front panel LEDs on the decoder, and can be done on
all or individually selected decoders. Click to toggle between FLASH, OFF, and ON.
To Next Page
Loading...