Page 75 of 78
4 VIEW SETTINGS
Selecting one of these buttons alters how the information is viewed on the System Log screen.
All shows all information of events currently recorded while the page is open within Mentor.
Clear hides all events recorded in the System Log from view.
Export Log downloads a .txt file of all System Log events recorded up until the page opened within
Mentor.
5 SET TIME
The System Time is set by the default NTP server(s). If there are no NTP servers set within Mentor,
the System Time can be manually entered in by typing into the date and time fields and selecting
the set button to apply the changes.
6 TIME ZONES
Select the dropdown menu to set the UTC time zone to a positive or negative UTC offset, then
select the set button to apply the changes.
7 SET NTP SERVER
By default, MXNet utilizes these four NTP servers from United States – us.pool.ntp.org:
0.us.pool.ntp.org
1.us.pool.ntp.org
2.us.pool.ntp.org
3.us.pool.ntp.org
The servers are listed by priority level, meaning that the System Time will always be set by the NTP
server listed in the first field. Should the first NTP server fail, then the System Time will be set by
the second listed NTP server, and so on.
Up to 5 NTP servers can be set by entering in the NTP server addresses into the fields and
selecting the set button to apply the changes.
To Next Page
Loading...