© AXION TECHNOLOGIES LTD. INSTALLATION
2.2.9. REAR SIGN POWER CABLE
The Rear Sign power cable connects the sign to the Front Sign junction. The power cable
connects as follows:
● Connect the power cable (5-pin connector) to the REAR SIGN connector (5-pin
connector) located on the Back Plate of the Front Destination Sign (See Figure 14).
● Connect the power cable (4-pin connector) to the Rear Sign connector.
2.2.10. KEY NUMBER SIGN POWER CABLE
The Key Number Sign power cable connects the sign to the Front Sign junction. The power
cable connects as follows:
● Connect the power cable (5-pin connector) to the KEY NUMBER SIGN connector (5-
pin connector) located on the Back Plate of the Front Sign. (See Figure 15).
● Connect the power cable (4-pin connector) to the Key Number Sign connector.
User Manual (Revision A) Document No.: 3042145 Page 18
Figure 14: Rear Sign Cable Connection
REAR SIGN
AFFICHEUR ARRIÈRE
REAR SIGN POWER CABLE
CÂBLE D' ALIMENTATION AFF. ARRIÈRE
FRONT SIGN RIGHT BACK PLATE
PLAQUE DE DROITE AFFICHEUR AVANT
To Next Page
Loading...