© AXION TECHNOLOGIES LTD. OPERATION
4.1.2.3. IDENTITY ERROR ("I" SYMBOL)
This error notifies the user that the identity of the sign present on the network does not match
that of the sign configured in the Control Console. The fault is identified by a flashing "I" on
the LCD. Location of the "I" letter shows which of the signs differs from the one configured.
The following figure shows an example of the identity error on the Rear Sign.
4.1.2.4. DATABASE INCOMPATIBILITY ERROR ("D" SYMBOL)
The database error notifies the user that the database configuration does not match that of
the sign network preprogrammed in the Control Console. The fault is displayed at the Control
Console startup. The message on the LCD reads as follows:
CONFIGURATION DIFFER
FROM DATABASE
Then, the Control Console operates normally. When activating Menu 13, the location of the
"D" letter shows which of the signs have a database different from that configured in the
Control Console. The following figure shows an example of database incompatibility error on
the Rear Sign.
User Manual (Revision A) Document No.: 3042145 Page 41
Figure 30: Identity Error
Figure 31: Database Incompatibility Error
To Next Page
Loading...
Need help?
General