© AXION TECHNOLOGIES LTD. OPERATION
NOTE
Verify that all of the Signs display the correct information.
● To deactivate the display of the public service announcement, follow the above steps
and enter "00" as public message number.
4.1.1.5. ENTERING TEXT FOR KEY NUMBER SIGN
● Press KEY NUMBER twice on the Control Console keypad.
● Using the Control Console alphanumeric keypad and the cursor arrows (to get letters
I to Z), select and enter the text to be displayed by the Key Number Sign (Four
characters maximum can be displayed.)
● Press ENTER to confirm your choice.
● When the text is entered, the Control Console LCD displays the following
information:
● Route number and Key Number text message are displayed in the upper left corner
of the LCD.
● Route content (message) is displayed on the second line. If this a multiline route,
the lines display alternately depending on the time interval set at database
programming.
User Manual (Revision A) Document No.: 3042145 Page 31
Figure 25: Entering Text for Key Number Sign (Example)
ENTER K.N. ONLY 1234
IJKLMNOPQRSTUVWXYZ
To Next Page
Loading...