BD LSR II - Page 48

48 BD LSR II User’s Guide
3 Pinch the vent line closed.
Figure 2-5 Sheath filter
4 Loosen the sheath filter vent cap to bleed off any air in the filter; collect the
excess fluid in a container.
5 Replace the vent cap.
6 Check the fluid lines for air bubbles.
7 Open the roller clamp on the blue cytometer fluid line (if necessary) to
bleed off any air in the line.
8 Close the roller clamp.
vent cap
vent line
cytometer fluid line
(roller clamp not visible)
LSR2.book Page 48 Tuesday, April 25, 2006 3:34 PM