BeaconMedaes TotalAlert Infinity - Page 110

9-9
TotalAlert Innity™ HTM Medical Gas Notication System
4107 9016 60.01
Figure 265
6. From home screen, Click on the central
badge to setup non-latin language param-
eters. (See Figure 266)
Figure 266
7. Starting at the top of the Central Badge
parmeter box, select gas type from pull
down menu (Gas color options will be up-
dated by default). Then select the Gas color,
based from the required standard (NFPA,
HTM, ISO). Custom colors can also be added
by entering the RGB numbers.
The non-latin language input eld (located
at the bottom of the parameter tab) de-
faults in English with the gas previously se-
lected. Enter the non-latin language in this
eld. The badge will update with the new
input on the website page. (See Figure 267)
8. To save, select “Save Gas Label” button.
Figure 267
9. To setup location of gas monitored,
select Location tab on badge (located just
under the gas label). Enter non-latin lan-
guage characters for the location of gas
being monitored. (See Figure 268)
10. To save, select “Save Location Label”
button.
Figure 268
11. To enter a non-latin language for the
meaning of the word “NORMAL” pertain-
ing to alarm condition, select Normal tab
on badge (located just under location tab).
Enter non-latin language characters for the
location of gas being monitored. (See Figure
269)
Figure 269