BeaconMedaes TotalAlert Infinity - Page 55

4-21
TotalAlert Innity™ HTM Medical Gas Notication System
4107 9016 60.01
Figure 72: Setup Information Screen
Conguration Button
Figure 74: Entering the Security Password
Figure 73: Changing the Security Password
NOTE:
If you would like to change the password, touch
Change Password. Enter a 4-10 digit password,
and touch the Enter button. Conrm the new
password. Touch the X button in the upper right to
close the SECURITY PASSWORD screen.
Entering the Password
The ENTER SECURITY PASSWORD screen appears.
Enter the security password. (The default password is
121212.)
• Touch the Enter button.
• Touch Continue to advance to the
CONFIGURATION screen.
• The CONFIGURATION screen will display as
uncongured and ready for setup.
The SETUP INFORMATION screen is the rst screen that
users will see on an uncongured alarm.
(The MAIN screen is the rst screen that users will see
on a congured alarm).
• Touch the Conguration button.
Primary Settings Tab
The PRIMARY SETTINGS tab allows you to select the
alarm type and initialize boards.
• Touch the PRIMARY SETTINGS tab.
• Alarm Type Tab
The ALARM TYPE screen denes which type of alarm
will be displayed and drives later setup functions.
Figure 75: Alarm Type Tab