Beaver Contessa - Four Point Weighing (Non Tag Axle); Weight Label

41
20 08 CONTESSA
DRIVING & SAFETY — 2
Weight Label Four Point Weighing (Non Tag Axle)
NOTE:
Following scale readings and Gross Axle
Weight Ratings are fictitious. Actual scale
readings and Gross Axle Weight Ratings
will vary with model and options.
The motorhome must be weighed fully
loaded to obtain accurate scale readings and
to determine the proper tire pressure. All slide
rooms must be in retracted position.
1. Take the FRONT axle Gross
Axle Weight Rating (GAWR)
and divide it by two. Example:
FRONT axle GAWR taken
from the motorhome Vehicle
Certication Label is 13,000
lbs. Divide the gure by 2,
using chart , record 6,500 lbs.
on line 1.
2. Weigh the driver side FRONT
corner (Scale A) and record
weight on chart scale A, line 2.
Example: 5,000 lbs.
3. Weigh the passengers side
FRONT corner (Scale C) and
record weight on chart Scale
C, line 2. Example: 4,000 lbs.
4. Add roadside and curbside from
line 1, for Gross Axle Weight
Rating (GAWR) and record on
chart under Totals. Example:
13,000 lbs.
Four Point Weighing Example Chart
020152b
100179h