Beaver Contessa - Cargo Carrying Capacity Flowchart

DRIVING & SAFETY — 2
48
20 08 CONTESSA
All slide rooms must be in the retracted
position when weighing the motorhome. The
motorhome must remain as level as possible
on the scale, even when an axle or side is not
physically on the scale.
Each wheel position must be weighed to
accurately determine the weight carried
at each wheel position.
Refer to the previous examples on
how to weigh each wheel position.
Each wheel position must be weighed
and recorded to determine proper tire
ination.
Wheel position weights are not to exceed
Gross Axle Weight Rating (GAWR)
and Gross Vehicle Weight Rating
(GVWR) as printed on the Motorhome
Vehicle Certication Label.
Compare wheel position weights with
weight ratings on the label. If wheel
position weights exceed maximum
specications, items will need to be
removed until weight rating is within
specication.




Cargo Carrying Capacity Flowchart
020254g