Beckhoff AX8000 User Manual

Diagmessages of module AxisMain
Multi axis servo system - AX8000140
Version: 1.1
6.41 63A2, Offset position actual value: No position offset
existing in source 'encoder memory'
There is no primary position offset stored, for the selected source 'encoder memory'.
Diagnostic Code (Hex.) Diagnostic Code (Dez.)
63A2 25506
Class Type
Error Error
Standard Reaction Reset
Axis is inoperable Execute Reset-Command (Fault reset).
Possible Causes Solutions
A position offset should used in the position control
loop, but no position offset has been saved.
Calibrate the axis and save the new position offset.
Internal: 0x63A2, Offset position actual value: No position offset existing in source 'encoder memory'

Beckhoff AX8000 Specifications

General

Brand	Beckhoff
Model	AX8000
Category	Servo Drives
Language	English