Beckhoff AX8000

Diagmessages of module TorqueControl
Multi axis servo system - AX8000 187
Version: 1.1
12.3 3182, Velocity actual Value raised above the max
channel accepted velocity
Velocity actual Value raised above the max channel accepted velocity
Diagnostic Code (Hex.) Diagnostic Code (Dez.)
3182 12674
Class Type
Error Overspeed error
Standard Reaction Reset
Closed loop ramp Execute Reset-Command (Fault reset).
Possible Causes Solutions
Velocity actual Value raised above the max channel
accepted velocity
Reduce your target velocity.
Internal: 0x3182, Velocity actual Value raised above the max channel accepted velocity