Beckhoff AX8000 User Manual

Standard-Messages
Multi axis servo system - AX800034
Version: 1.1
3.20 6181, Internal Software Error Type B
Fatal Software Error.
Diagnostic Code (Hex.) Diagnostic Code (Dez.)
6181 24961
Class Type
Error Error
Standard Reaction Reset
Open loop ramp Execute Reset-Command (Fault reset).
Possible Causes Solutions
Fatal Software Exception Error. Please switch the 24 V supply off and on again. If this
happens again, contact the Beckhoff branch office
that is responsible for you.
Internal: 0x6181, Internal Software Error Type B, Additional Errorcode 0x%x

Beckhoff AX8000 Specifications

General

Brand	Beckhoff
Model	AX8000
Category	Servo Drives
Language	English