Diagmessages of module ActiveFrontEnd
Multi axis servo system - AX8000198
Version: 1.1
13.6 6389, Parameter Torque Control: The value in object is
higher then the configured peak current
The rated current is higher then the channel peak current.
Diagnostic Code (Hex.) Diagnostic Code (Dez.)
6389 25481
Class Type
Error Error
Standard Reaction Reset
Axis is inoperable Execute Reset-Command (Fault reset).
Possible Causes Solutions
Something is wrong with the parameters in this
object.
Please check the parameters of the mentioned
object.
Internal: 0x6389, Parameter Torque Control: The value in object 0x%x/%x is higher then the configured peak
current (0x%x/%x).
To Next Page
General
