Beckhoff AX8000 User Manual

Standard-Messages
Multi axis servo system - AX8000 51
Version: 1.1
3.37 A005, Sync Manager Address is not multiple of 4.
Diagnostic Code (Hex.) Diagnostic Code (Dez.)
A005 40965
Class Type
Error Error
Standard Reaction Reset
Axis is inoperable Execute Reset-Command (Fault reset).
Possible Causes Solutions
The Sync Manager Startaddress is not a multiple of
4.
Configure the Startaddress to a multiple of 4. (32 Bit
Alignment)
Internal: 0xA005, Sync Manager %u Address 0x%x is not multiple of 4.

Beckhoff AX8000 Specifications

General

Brand	Beckhoff
Model	AX8000
Category	Servo Drives
Language	English