Standard-Messages
Multi axis servo system - AX8000 49
Version: 1.1
3.35 A003, Transition Pre-Op to Safe-Op not successful.
Sync Manager Address Range overlap.
Diagnostic Code (Hex.) Diagnostic Code (Dez.)
A003 40963
Class Type
Error Error
Standard Reaction Reset
Axis is inoperable Execute Reset-Command (Fault reset).
Possible Causes Solutions
The Parameters of the CoE Communication Objects
do not fit the Sync Manager Parameters.
Please check, if you are working with the right
EtherCAT Device Description XML-File.
Internal: 0xA003, Transition Pre-Op to Safe-Op not successful. Sync Manager %u Address Range 0x%x..0x
%x overlaps Sync Manager %u Address Range 0x%x..0x%x
To Next Page
General
