Beissbarth MT ZERO 6 LCD

Need help?

Do you have a question about the Beissbarth MT ZERO 6 LCD and is the answer not in the manual?

Summary

User Information

Safety Instructions

Covers essential safety instructions for operation, connection, and startup.

Initial Commissioning

Unpacking

Step-by-step guide for unpacking the MT ZERO 6 LCD and checking for damage.

Floor Mounting

Details on anchoring the MT ZERO 6 LCD to the ground to prevent tipping.

Mounting the Digital Control Panel

Digital Control Panel Connections

Connecting the Compressed Air

Electrical Connection

Crucial safety warnings and procedures for connecting the machine to the mains power.

MT ZERO 6 LCD Calibration

Overview of calibration steps required after initial commissioning.

Attaching and Removing a Wheel

MT ZERO 6 LCD AWx

MT ZERO 6 LCD AWXP

Wheel Removal in the Event of Faults

Procedure for manually removing a wheel when the machine has faults.

Balancing the Wheel

Important Notes on Balancing

Highlights dangers of incorrect balancing and essential precautions.

Working Range

Basic Wheel Balancing Procedure

Outlines the essential steps for performing a wheel balancing operation.

Balancing Programs Overview

A table comparing different balancing programs, weight positions, and rim types.

Automatic Balancing Program Selection

Explains how the machine automatically selects balancing programs based on rim data.

Manual Balancing Program Selection

Acquiring Rim Data Automatically

Details the automatic process of collecting rim dimensions for balancing.

Standard, ALU1 (PAX1), ALU4, ALU5 and All Static Balancing Programs

ALU2 (PAX2) and ALU3

Manual Rim Data Measurement

Procedure for manually entering rim distance, width, and diameter.

Measuring Imbalance

Steps to measure wheel imbalance and display the required balance weight values.

Attaching Balance Weights

Guide on how to attach balance weights based on display information.

Positioning the Wheel

Explains automatic wheel positioning and securing for balance weight attachment.

Splitting Balance Weights (Split Program)

Procedure for hiding balance weights behind spokes using the split program.

Attaching the Clip-On Balance Weights

Instructions for attaching clip-on balance weights using specific tools.

Attaching Adhesive Balance Weights

Details on attaching adhesive balance weights using electronic gauge or manual caliper.

With the Electronic Rim Distance Gauge

With Manual Vernier Caliper

Attaching Adhesive Balance Weights by Laser Indicator

Using the laser indicator for precise attachment of adhesive balance weights.

Imbalance Minimization

Faults

Maintenance

Cleaning and Maintenance

Guidelines for cleaning the machine, emphasizing safety and approved cleaning agents.

Service Intervals

Diagnosis

Calibration

Explains the importance and sequence of calibration for accuracy.

Calling Up the Calibration Menu

Calibrating the Flange

Detailed procedure for calibrating the machine's flange.

Calibrate the Electronic Rim-Distance Gauge and the Sonar Probe.

Procedure for calibrating the electronic rim-distance gauge and sonar probe.

Calibrating by Wheel and Balance Weight

Steps to calibrate the machine using a test wheel and balance weight.

Reference Measurement

Procedure for performing a reference measurement for accuracy checks.

External Laser Indicator Calibration

Instructions for calibrating the external laser indicator with different procedures.

Decommissioning

Disposal and Scrapping

Information on safe disposal of the machine and hazardous substances.

Technical Data

MT ZERO 6 LCD