Beissbarth MT ZERO 6 LCD - Table of Contents

1 695 600 968 2019-01-28| Beissbarth GmbH
68 | MT ZERO 6 LCD |
1. Symbols used 70
1.1 In the documentation 70
1.1.1 Warning notices -
Structure and meaning 70
1.1.2 Symbols in this documentation 70
1.2 On the product 70
1.2.1 Safety symbols 71
1.2.2 Certification symbols 71
1.2.3 Symbols on the product 72
2. User information 73
2.1 Important notes 73
2.2 Safety instructions 73
3. Product description 74
3.1 Intended use 74
3.2 Prerequisites 74
3.3 Scope of delivery 74
3.3.1 MT ZERO 6 LCD 74
3.3.2 Parts set, mechanical quick-action
clampxxx 75
3.3.3 Mechanical quick-action clamp (NA)
parts set 75
3.3.4 Parts set, pneumatic quick-action
clamp 75
3.3.5 Equipment 76
3.4 Special accessories 77
3.5 Component description 78
4. Initial commissioning 80
4.1 Unpacking 80
4.2 Transporting an handling the wheel balancing
machine 80
4.3 Floor mounting 81
4.4 Installing the wheel guard moving unit 81
4.5 Installing the support frame with sonar 83
4.6 Installing the wheel guard 84
4.7 Preparing the electrical connectors 84
4.8 Mounting the digital control panel 86
4.9 Digital control panel connections 87
4.10 Installing the clamping tool holders 88
4.11 Connecting the compressed air 88
4.12 Electrical connection 89
4.13 Ignition 89
4.14 MT ZERO 6 LCD calibration 89
5. Fitting and removing the flange 90
5.1 MT ZERO 6 LCD AWx 90
5.1.1 Removing the flange 90
5.1.2 Fitting the flange 90
5.2 MT ZERO 6 LCD AWxP 91
5.2.1 Removing the flange 91
5.2.2 Fitting the flange 91
6. Attaching and removing a wheel 92
6.1 MT ZERO 6 LCD AWx 92
6.1.1 Attaching a wheel 92
6.1.2 Removing a wheel 92
6.2 MT ZERO 6 LCD AWxP 93
6.2.1 Attaching a wheel 93
6.2.2 Removing a wheel 93
6.2.3 Wheel removal in the event of faults 93
7. Operation 94
7.1 Control keys 94
7.2 Display 94
7.2.1 Basic balancing screen 94
7.2.2 Data collection screen 95
8. Balancing the wheel 95
8.1 Important notes on balancing 95
8.2 Working range 96
8.3 Basic wheel balancing procedure 96
8.4 Selecting the type of vehicle 96
8.5 Balancing programs overview 97
8.6 Automatic balancing program selection 98
8.7 Manual balancing program selection 100
8.8 Acquiring rim data automatically 100
8.8.1 Standard, ALU1 (PAX1), ALU4, ALU5 and
all static balancing programs 100
8.8.2 ALU2 (PAX2) and ALU3 101
8.9 Manual rim data measurement 101
8.9.1 Standard, ALU1 (PAX1), ALU4, ALU5 and
all static balancing programsxxx 101
8.9.2 ALU2 (PAX2), ALU3 102
8.10 Measuring imbalance 103
8.11 Attaching balance weights 103
8.11.1 Overview of tools for attaching the
balance weights 103
8.11.2 Positioning the wheel 104
8.11.3 Splitting balance weights (split
program) 106
en
Contents English