1 695 600 968 2019-01-28| Beissbarth GmbH
126 | MT ZERO 6 LCD | Decommissioning
13. Decommissioning
13.1 Temporary shutdown
In the event of lengthy periods of non-use:
13.2 Change of location
¶ If the MT ZERO 6 LCD is passed on, all the
documentation included in the scope of delivery must
be handed over together with the unit.
¶ The MT ZERO 6 LCD is only ever to be transported
in the original or equivalent packaging.
¶ Unplug the electrical connection.
¶ Heed the notes on initial commissioning.
13.3 Disposal and scrapping
13.3.1 Substances hazardous to water
! Oils and greases as well as refuse containing oil and
grease (e.g. filters) represent a hazard to water.
1. Substances hazardous to water must not be allowed
to enter the sewage system.
2. Substances hazardous to water must be disposed of
in accordance with the applicable regulations.
13.3.2 MT ZERO 6 LCD
and accessories
1. Disconnect the MT ZERO 6 LCD from the mains
and detach the power cord.
2. Dismantle the MT ZERO 6 LCD and sort out and
dispose of the different materials in accordance with
the applicable regulations.
MT ZERO 6 LCD, accessories and
packaging should be sorted for
environmental-friendly recycling.
¶ Do not dispose MT ZERO 6 LCD into
household waste.
Only for EC countries:
The MT ZERO 6 LCD is subject to the
European directive 2012/19/EC (WEEE).
Dispose of used electrical and electronic
devices, including cables, accessories and
batteries, separately from household waste.
¶ Make use of the local return and collection
systems for disposal.
¶ Proper disposal of MT ZERO 6 LCD
prevents environmental pollution and
possible health hazards.
en
¶ Unplug the electrical connection.
¶ Secure the MT ZERO 6 LCD on the pallet using the
screws.
To Next Page
Loading...
