Belden thinklogical SMP2 - Applying Flex Key Settings to Receivers; Selecting Action Keys for Hotkeys

System Management Portfolio 2.0 Product Manual Rev. C, Feb. 2020
Page 70
3. The saved HOST or UPDATE settings are read here. Click on Rd Mod to establish a connection
to the Host. Then click on Read Host Keys to read the existing Flexkeys from the module. The
default keys are shown here. They may be used as they are or modified for your application.
4. Left-click on the pull-down menus under Key1, Key2 and Key3 to select an action key.