Belden thinklogical SMP2 - Configuring Flex Keys LOSOUT Values; Q-Series System Flex Keys Configuration

System Management Portfolio 2.0 Product Manual Rev. C, Feb. 2020
Page 73
Left-click on the Key2 drop-down menu to select the Key 2 sequence. In this case, F1 is selected for
Key 2.
By left-clicking on the LOSOUT1 drop-down menu, users can select from a list of hex values, so that
pressing L-Ctrl and F1 will execute the function associated with that value.
Users can also enter a non-hex value by scrolling to the bottom of the list and clicking on Spec1.