BinTec RS120 - Page 164

Field Description
• 350 *. * & 3? '
• 350> *. *  3? '
• 350 3? E
• 350> 3? E
Fields in the Current Line Speed menu.
Field Description
Downstream Displays the data rate in the receive direction (direction from
CO/DSLAM to CPE/router) in bits per second.
The value cannot be changed.
Upstream Displays the data rate in the send direction (direction from CPE/
router to CO/DSLAM) in bits per second.
The value cannot be changed.
Fields in the DSL Parameter menu.
Field Description
DSL Mode Select the ADSL synchronization type.
Possible values:
• 350 3 (default value): The ADSL mode is auto-
matically adapted for the remote terminal.
• 350 :ADSL1 / G.DMT is used.
• 350: ADSL2 / G.992.3 is used.
• 350 1: ADSL2 Plus / G.992.5 is used.
• 3 3? '!: Only for Annex A devices. The AD-
SL mode is automatically adapted to the other end with refer-
ence to G.992.3 Annex M.
• 350 1 3? '!: Only for Annex A devices. ADSL2
Plus / G.992.3 Annex M is used.
• 350 3? E: Only for Annex J devices. ADSL2 Plus /
G.992.3 Annex J is used.
• 350> 3? E: Only for Annex J devices. ADSL2 Plus /
G.992.5 Annex J is used.
• %: The ADSL interface is not active.
8 Physical Interfaces bintec elmeg GmbH
150 bintec RS Series