Field Description
MSN Recognition Select the mode your device is to use for the number comparis-
on for MSN with the called party number of the incoming call.
Possible values:
• A# 0$ (default value)
• 0$ A# 55!: Always select if your device is con-
nected to a point-to-point connection.
Bearer Service Select the type of incoming call (service detection).
Possible values:
• 5 > 9% (default value): Both data and voice calls.
• 5: data call
• 9%: Voice call (modem, voice, analog fax)
8.3 DSL Modem
8.3.1 DSL Configuration
In this menu, you make the basic settings for your ADSL connection.
8 Physical Interfaces bintec elmeg GmbH
148 bintec RS Series
To Next Page
Loading...