BinTec RS120 - 4.4 Setting up an internet connection; 4.4.1 Internet connection over internal ADSL modem; 4.4.2 Internet connection over UMTS;LTE

• The password should contain at least one character that is not a letter (special character
or number).
• The password should be at least 8 characters long.
• Change your password regularly, e.g. every 90 days.
4.4 Setting up an internet connection
You can set up different types of Internet connections using your device. The most com-
mon configurations are described below. The GUI Internet wizard can be used to help con-
figure alternative configuration types.
4.4.1 Internet connection over internal ADSL modem
Apart from bintec RS120wu and bintec RS120 , all devices in the RS series have an in-
tegrated ADSL2+ modem for rapid Internet access set-up. To make it easier to configure
an ADSL internet connection, the GUI has a wizard to guide you through the connection
set-up process simply and quickly. A selection of preconfigured connections from leading
providers (T-Home, Arcor) makes configuration even easier.
(1) In GUI select the Assistants->Internet Access menu.
(2) With New make a new entry and take over the Connection Type 1 350
'.
(3) Follow the steps shown by the wizard. The wizard has its own online help, which of-
fers all of the information you may require.
(4) Once you have exited the wizard, save the configuration by clicking on the Save con-
figuration button above the menu navigation.
4.4.2 Internet connection over UMTS/LTE
Setting up an Internet connection (only for bintec RS120wu , bintec RS230au+ and
bintec RS232j-4G) over UMTS/LTE requires an activated SIM card for your UMTS/LTE
provider. Insert the card as described in Inserting the SIM card on page 47.
(1) In GUI select the Assistants->Internet Access menu.
(2) Click New to create a new entry and as Connection Type select .'*/0*.
(3) Follow the steps shown by the wizard. The wizard has its own online help, which of-
fers all of the information you may require.
(4) Once you have exited the wizard, save the configuration by clicking on the Save con-
figuration button above the menu navigation.
4 Basic configuration bintec elmeg GmbH
56 bintec RS Series