BinTec RS120 - IP;MAC Binding

Field Description
Possible values:
•  (default value)
• -
Provisioning Server Only für Select vendor = 
Enter which manufacturer value shall be transmitted.
For the setting Select vendor = , the default value
1+ is displayed.
You can complete the IP address of the desired server.
Vendor Description Only für Select vendor = -
Type in the name of the manufacturer for which you want to
transfer specific DHCP server settings.
Custom DHCP Options Only für Select vendor = -
Use Add to add more entries.
You can add custom DHCP options.
18.4.3 IP/MAC Binding
The Local Services->DHCP Server->IP/MAC Binding menu displays a list of all clients
that received an IP address from your device via DHCP.
You can allocate an IP address from a defined IP address pool to specific MAC addresses.
You can do this by selecting the Static Binding option in the list to convert a list entry as a
fixed binding, or you manually create a fixed IP/MAC binding by configuring this in the New
sub-menu.
Note
You can only create new static IP/MAC bindings if IP address ranges were configured
in Local Services->DHCP Server->DHCP Pool.
18 Local Services bintec elmeg GmbH
414 bintec RS Series