Field Description
wireless networks as soon as the radio signal of the existing
radio connection becomes unsuitable for higher data rates.
• )1 A# (default value): Standard roaming.
• 17 A#: The WLAN client searches for available
wireless networks as soon as the radio signal of the existing
radio connection becomes weaker.
• ) A#: The WLAN client searches for available wire-
less networks if it is no longer connected to a wireless net-
work.
• 6 A#: Specify the individual roaming paramet-
ers.
Scan Threshold
Indicates the value in dBm above which the system scans for
available wireless networks in the background.
The value can only be modified for Roaming Profile = 6
A#. The default value is , ;.
Scan Interval Indicates the interval in milliseconds after which the system
scans for available wireless networks.
The value can only be modified for Roaming Profile = 6
A#. The default value is .
Channel Sweep Indicates how many frequencies are scanned in the back-
ground.
The value can only be modified for Roaming Profile = 6
A#. The default value is . The value disables the scan
in the background. The value enables the scan of all avail-
able frequencies.
Min. Period Active
Scan
Displays the minimum active scanning time for a frequency in
milliseconds.
The value can only be modified for Roaming Profile = 6
A#. The default value is .
Max. Period Active
Scan
Displays the maximum active scanning time for a frequency in
milliseconds.
The value can only be modified for Roaming Profile = 6
A#. The default value is .
10 Wireless LAN bintec elmeg GmbH
184 bintec RS Series
To Next Page
Loading...
