Field Description
sion 1
• 4: Internet Kex Exchange Protocol Version 2
Authentication Method
Only for Internet Key Exchange = 4
Select the authentication method.
Possible values:
• 4( (default value): If you do not use certific-
ates for the authentication, you can select Preshared Keys.
These are configured during peer configuration in the IPSec
Peers. The preshared key is the shared password.
• A3 #: Phase 1 key calculations are authenticated
using the RSA algorithm.
Local ID Type
Only for Internet Key Exchange = 4
Select the local ID type.
Possible ID types:
• =11( H1$ 5 ) =H5)!
• 1 3
• 9 3
• 3) 5) 5# )!
• 4( 5: Any string
Local ID
Only for Internet Key Exchange = 4
Enter the ID of your device.
For Authentication Method = 53 # or A3 #
the option Use Subject Name from certificate is dis-
played.
When you enable the option Use Subject Name from certific-
ate, the first alternative subject name indicated in the certificate
is used, or, if none is specified, the subject name of the certific-
ate is used.
Note: If you use certificates for authentication and your certific-
ate contains alternative subject names (see Certificates on
page 126), you must make sure your device selects the first al-
15 VPN bintec elmeg GmbH
320 bintec RS Series
To Next Page
Loading...
