18.1.4.1 New
Choose the New button to set up additional forwardings.
Fig. 151: Local Services->DNS->Domain Forwarding->New
The menu Local Services->DNS->Domain Forwarding->New consists of the following
fields:
Fields in the Forwarding Parameters menu.
Field Description
Forward Select whether a host or domain is to be forwarded.
Possible values:
• @ (default value)
• 5
Host Only for Forwarding = @
Enter the name of the host to be forwarded.
The entry can also start with the wildcard *, e.g.
*.bintec-elmeg.com. If a name is entered without a full stop, you
complete with OK " <Default Domain>. " " is added.
Domain Only for Forwarding = 5
Enter the name of the domain to be forwarded.
The entry can also start with the wildcard *, e.g.
*.bintec-elmeg.com. If a name is entered without a full stop, you
complete with OK " <Default Domain>. " " is added.
bintec elmeg GmbH
18 Local Services
bintec RS Series 401
To Next Page
Loading...
