Field Description
Tx Packets Shows the total number of packets sent.
Rx Packets Shows the total number of packets received.
Signal dBm (RSSI1,
RSSI2, RSSI3)
Shows the received signal strength in dBm.
Noise dBm Shows the received noise strength in dBm.
Data Rate mbps Shows the current transmission rate of data received by this cli-
ent in mbps.
The following clock rates are possible: IEEE 802.11b: 11, 5.5, 2
and 1 mbps; IEEE 802.11g/a: 54, 48, 36, 24, 18, 12, 9, 6 mbps.
If the 5 GHz frequency band is used, the indication of 11, 5.5, 2
and 1 mbps is suppressed for IEEE 802.11b.
VSS - Details for Connected Clients
In the Monitoring->WLAN->VSS-><Connected Client> -> menu, the current values
and activities of a connected client are shown. The values for wireless mode 802.11n are
listed separately.
bintec elmeg GmbH
21 Monitoring
bintec RS Series 511
To Next Page
