Balance System SD (with v4.X software) 103
Figure 10.6. Stored Percent Weight Bearing Training Results Screen
G-Codes can be associated for the m-CTSIB test. The process is the same as for the
Percent Weight Bearing Training described above.
The Impairment Percentage numbers refer to the degree to which the patient is
considered impaired; with 100% meaning the patient is completely impaired and
unable to do the associated task without help. The Severity Code Modifiers are a series
of impairment level ranges made up of about 20 percentage points each, where CI, for
example, would represent a status of 1-19% impairment.
Table 10.1. The scale of 7 modifiers is intended to denote the patient's degree of
impairment/limitation/restriction.
Impairment/ Limitation /Restriction Code
When selected and associated, the G-Code, Impair %, and the Modifier Code are displayed
on the right side of the Test report.
To Next Page
Loading...
