S10/S12/S10A/S12A Patient Monitor User’s Manual
13-1
Chapter 13 IBP
13.1. Introduction
The monitor can provide up to 2 channels of IBP measurement results. IBP
measurement is applicable for adult, pediatric and neonatal.
13.2. Safety information
WARNING:
Use only IBP transducers specified in this manual. Never reuse disposable
pressure transducers.
The operator should avoid contact with conductive parts of the accessories
when being connected or applied.
When the monitor is used with HF surgical equipment, the transducer and the
cables must be avoided conductive connection to the HF equipment to protect
against burns to the patient.
When using accessories, the operating temperature should be taken into
consideration. For more information, see instructions for use of accessories.
All invasive measurement involves risks to the patient. Use aseptic technique
and perform according to manufacturer’s instructions during measurement.
Mechanical shock to the IBP sensor may cause severe shifts in zero balance and
calibration, and cause erroneous readings.
To Next Page
Loading...