S10/S12/S10A/S12A Patient Monitor User’s Manual
3-5
NOTE
：
The AC power supply of the monitor is not cuff off through the power switch.
To completely disconnect the power supply, unplug the power cord.
In case of a temporary power failure, the monitor retains patient data before
shutdown, including patient monitoring data and configuration data.
3.4. Operation and Browse
Everything you need to operate the monitor is on its screen. Almost every element on
the screen is interactive. Screen elements include parameter values, waveforms, quick
keys, information area, alarms area, menus, etc. Often you can access the same element in
different ways. For example, you can access a parameter setup menu by selecting
corresponding parameter area or waveform area.
3.4.1. Using the Touch screen
Click on the touch screen to complete some operations quickly and easily.
In order to prevent misoperation of the touch screen, you can operate the 【Lock
Screen】 quick key to temporarily lock the touch screen. After the touch screen is locked,
the 【Lock Screen】 quick key become 【Unlock Screen】, and its background color is
blue, which indicating that thetouch screen operation is disabled.
The lock time of the touch screen can be customized, the steps are as follows:
1. Enter the【Other】interface in the following ways:
Select 【Screen Setup】quick key → select 【Other】submenu;
2. Set the 【Screen Lock Duration】. The touch screen is unlocked under the
following conditions:
When the set lock screen duration is reached, the touch screen is
automatically unlocked.
Select the 【Unlock Screen】quick key to unlock the touch screen.
CAUTION：
Check the touch screen whether it is damaged or breakage before use. If it is
found to be damaged or broken, please stop using the monitor immediately and
To Next Page
Loading...