S10/S12/S10A/S12A Patient Monitor User’s Manual
63
Appendix E Cybersecurity
This chapter mainly describes the information related to cybersecurity of the
monitor.
E.1 Operating environment
Hardware environment
Monitor software is only applicable to S series patient monitor
hardware platform.
Screen: 10.4 and 12.1 LCD screens with 4:3 aspect ratio and 800*600
resolution.
Peripherals: nurse call module, recorder.
Software environment
Main board: S12MB
Operating system: LinuxLinux-3.2.0 kernel + Busybox filesystem.
Database: sqlite-3.16.2
Network environment
Apply to LAN
E.2 Network data interface
The communication interface between the monitor and the CMS is wired or wireless
Ethernet, using the standard TCP/IP protocol family, and the application layer data format
follows the Central Monitoring System Network Communication Protocol during
transmission.
E.3 User access control mechanism
a） User identification method: after entering the authorization password, you
have the corresponding user type setting authority.
b） User types: medical personnel, hospital equipment maintenance personnel,
factory maintenance personnel.
c） User authority:
1 ） Authority of medical staff: No password. Automatically enter the
monitoring interface after starting up, and can be routinely set as required.
To Next Page
Loading...