S10/S12/S10A/S12A Patient Monitor User’s Manual
20-2
20.3. Starting Recordings
You can start recording by manual way through the following means:
Press 【Real-time Record】 quick key below the monitor interface to start
real-time recording.
Select 【Record】 button in the current window or above the menu to start
the associated record of the special function.
The recorder can start recording automatically in the following situation:
If the periodic recording has been started, the recorder will start recording in
the set time interval. Refer to 20.6 Setting the Recorder for detailed
instructions.
When the 【Alm Switch】 and 【Alm Output】 of a parameter are both
set to 【On】, once the parameter gives an alarm, the monitor will be
triggered to start an alarm record.
20.4. Stopping Recordings
You can stop recording by manual way through the following means:
In the process of real-time recording, click the 【Real-time Record】 quick
key.
The recorder will stop automatically in the following situation:
The recorder has finished its task.
The recorder is sort of paper.
There is something wrong with the recorder
20.5. Recording Flags
When the printing of the record report is finished, there are the following flags:
For automatically stopped recordings: Print “***END***” at the end of the
report.
For manually or abnormally stopped recordings: There is no flag printing at
the end of the report.
To Next Page
Loading...