S10/S12/S10A/S12A Patient Monitor User’s Manual
4-4
4.4. Connecting to a Central Monitoring System
If your patient monitor is connected to a central monitoring system (CMS):
The monitor sends patient information, real-time monitoring or measurement
data, alarm limits, alarm levels, alarm messages, prompts, and various settings
to the central monitoring system.
The central monitoring system and the monitor display synchronously, and
some functions can be controlled bidirectionally. For example, change patient
information, receive patient data, cancel patient data, etc.
Alarm delay to the central monitoring system: the alarm delay time from this
equipment to the central monitoring system is ≤2s.
For details, refer to the CMS’s instructions for use.
To Next Page
Loading...