Biolight Meditech S10 - Dynamic Trend Screen

S10/S12/S10A/S12A Patient Monitor User’s Manual
6-2

1. Select【Main Menu】quick keyfrom【Parameter】column to select【Param
Color】.
2. Select【Current Select】submenu to set the colors of parameter values and
waveforms.
3. Select 【All】submenuto set the colors of all parameter values and waveforms.
6.2. Dynamic Trend Screen
6.2.1. Entering Dynamic Trend Screen
The Dynamic Trend window is located to the left of the waveform area, showing the
trend of a series of parameters in a recent period of time.
You can enter the Dynamic Trend
screen in any of the following ways:
 Select【Screen Setup】quick keySelect【Screen Select】submenuSelect
【Dynamic Trend】.
 Select【Main Menu】quick keyfrom 【Display】column to select【Screen
Select】Select【Dynamic Trend】.
In the Dynamic Trend window, the parameter label name of the trend is displayed
above each trend curve, and the trend scale is displayed on the left. Trend times are
displayed at the bottom of the window.
6.2.2. Setting the Trend Time
Follow these steps to set the trend time:
1. Enter the Dynamic Trend window.
2. Select
the Dynamic Trend area, open 【 Dynamic Trend 】 menu.
3. Select【Trend Length】.
6.2.3. Exiting Dynamic Trend Screen
You can exit the Dynamic Trend screen by any of the following methods:
 Select【Screen Setup】quick key Select 【 Screen Select 】 submenu Select
the screen you need to enter.
 Select【Main Menu】quick keyfrom【Display】column to select【Screen
Select】Select
the screen you need to enter.