S10/S12/S10A/S12A Patient Monitor User’s Manual
19-12
select 【Nephridium】.
2. Enter the correct value for each parameter. For a patient who is being
monitored, the currently measured values are automatically taken, and the
height and weight are derived from the patient information entered.
3. Select 【Calculate】 to calculate the value of each output parameter. The
calculated value is greater than the normal upper limit is indicated by an up
arrow “”; the calculated value is lower than the normal lower limit is
indicated by a down arrow “”.
Select 【Range】 to show the normal range of each parameter.
Select 【Unit】 to show the unit of each parameter.
19.7.2. Input Parameter
Input Parameters Unit Full Name
URK mmol/L urine pstassium
URNa mmol/L urinary sodium
Urine mL/24h urine
Posm mosm/kg plasm osmolality
Uosm mosm/kg urineosmolality
SerNa mmol/L serumsodium
Cr umol/L creatinine
UCr umol/L urinecreatinine
BUN mmol/L blood urea nitrogen
Height cm, inch height
Weight kg, lb weight
To Next Page
Loading...