S10/S12/S10A/S12A Patient Monitor User’s Manual
2-2
entanglement or suffocated, the cables entangled, or subject to electrical
interference.
To avoid danger or pollute the environment, the packaging materials must be
handled in accordance with local regulations or the hospital's waste disposal
system. Packaging materials must be placed out of reach of children.
When monitoring the patient, the monitor should be continuously powered.
Unexpected power interruption of the monitor may result in loss of patient
data.
The user should periodically check and move the sensor on the skin to avoid
adverse skin or tissue effects.
CAUTION：
To ensure patient safety, use only parts and accessories specified in this
manual.
Magnetic and electrical fields are capable of interfering with the proper
performance of the monitor. For this reason make sure that all external devices
operated in the vicinity of the monitor comply with the relevant EMC
requirements. Mobile phone, X-ray equipment or MRI devices are a possible
source of interference as they may emit higher levels of electromagnetic
radiation.
To avoid contamination or infection of personnel, environment or other
equipments, the equipment and its accessories that meet the service life must be
disposed in accordance with relevant local regulations or hospital systems.
The lifetime of the patient monitor is 5 years.
Before turning on the device, make sure that the voltage and frequency of the
power supply meet the label of the device or the requirements specified in this
manual.
Please install or carry the equipment properly to prevent it from falling,
colliding, being subjected to strong vibration or other mechanical external
damage.
The monitor must be wiped dry immediately after exposure to rain or splashes.
Please do not mix different types and brands of electrodes. Mixing the
To Next Page
Loading...