411829-L, Maintenance April 2012 Page 5-1
Chapter
5
Maintenance
WARNING
Before performing any procedures in this chapter, please read and observe
the safety requirements in the “Isolera Installation and Safety” document
(P/N 411828). Failure to follow those requirements may result in personal
injury and/or equipment damage. If the system has been damaged and
does not function properly, shut it down and contact Biotage 1-Point
Support immediately.
5.1 Contact Biotage 1-Point Support
If your system has been damaged and does not function properly, shut it down and contact Biotage
1-Point Support. See contact details on page 7-1.
5.2 Accessories
To order cartridges, please see the Biotage Product Catalog. The catalog can be downloaded at
www.biotage.com. For a complete list of accessories, please contact you local representative.
5.2.1 All Isolera Systems
Accessory Quantity Part Number
Test tube rack, 18 x 130 mm (for 17.5 x 130 mm test tubes)
Not recommended on Isolera LS.
4 412593
Test tube rack, 18 x 150 mm 4 411792
Test tube rack, 25 x 150 mm 4 411793
Bottle rack, 120 ml 4 411794
Bottle rack, 240 ml 1 411934
Bottle rack, 480 ml 1 411929
120 ml bottles 96 08742
240 ml bottles 84 08743
480 ml bottles 24 411935
Rack number guide for 18 x 130 mm and 18 x 150 mm racks 4 413176
Rack number guide for 25 x 150 mm rack 4 413175
Collection tray for Isolera racks 1 411853
Cartridge holder for SNAP and SNAP Ultra 50g to 120g 1 411923
Cartridge holder for SNAP and SNAP Ultra 340g to 400g 1 411924
Cartridge holder nut 1 411340
To Next Page
Loading...
