EasyManuals Logo

Bizerba GSP H User Manual

Bizerba GSP H
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
About these instructions Instruction manual GSP
6 / 92 38107010002 en-US
1 About these instructions
Read the instruction manual very carefully before connecting and switching on the machine
to ensure that you utilize the full quality and potential of this machine and avoid any potential
risks.
This instruction manual covers the use, installation, operating, cleaning and maintenance of
the machine.
Our products undergo continuous further development and are subject to different country-
specific regulations. Examples of pictures and graphics included in these instructions may
vary from the version you have received.
1.1 Safe-keeping
The owner's manual are an integral part of the machine and must be stored close to the ma-
chine to be easily accessible to others.
If the machine is sold, the owner's manual must be included in its entirety.
1.2 Target group
The machine may only be operated by trained personnel. This means that the operator has
to be familiar with the contents of the instruction manual.
The minimum age of the operating personnel by German law is 14. Other age limits may ap-
ply according to the corresponding national regulations. Therefore the operating company
must check the legislation at the place of machine installation.
Installation, maintenance and repair works must be performed by Bizerba authorized special-
ists only.
1.3 Symbols used
Various symbols are used in these instructions.
Icon Description
Text with arrow prompts you to carry out an action.
Item number in figure.
<Key> Text within <> refers to a key.
"Display" Text within "" shows the display text.
Requirements are displayed with a gray background.
Instruction
These instructions are mandatory for you.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Bizerba GSP H and is the answer not in the manual?

Bizerba GSP H Specifications

General IconGeneral
TypeSlicer
Blade Diameter330 mm
Cutting Thickness0 - 24 mm
MaterialAnodized aluminum
OperationManual
Voltage230 V
Frequency50 Hz
Protection ClassIP33

Related product manuals