Bizerba GSP H User Manual

Instruction manual GSP Installation
38107010002 en-US 25 / 92
4.2.2 Electrical connection
Information on identification plate
Bizerba logo BIZERBA
Machine type GSP H
GSP HD
Machine description Slicer
Machine number ...
Production code X-..
IP rating IP33
Electrical data see identification plate
Manufacturer's address Bizerba SE & Co. KG
Wilhelm-Kraut-Straße 65
72336 Balingen, Germany
WARNING
Incorrect supply voltage!
Destruction of electric components, fire hazard.
– Do not connect the machine to the power supply if the power supply
data does not correspond to the machine's connection values.
Mains data must be identical.
– Inform Bizerba Customer Service.
Check before connecting to mains
Before connecting the machine, check the mains data on the rating plate
with the mains data of the power supply.
Installation of power supply provided by customer
The installation of the power supply to connect our machines must be carried out in accor-
dance with country-specific regulations and rules derived thereof. These essentially include
the recommendations of at least one of the following commissions:
– International Electro-technical Commission (IEC)
– European Committee for Electro-technical Standardization (CENELEC)
The machine has been built according to Protection Type I and has to be connected to the
protective conductor.

Bizerba GSP H Specifications

General

Type	Slicer
Blade Diameter	330 mm
Cutting Thickness	0 - 24 mm
Material	Anodized aluminum
Operation	Manual
Voltage	230 V
Frequency	50 Hz
Protection Class	IP33