Instruction manual GSP Maintenance
38107010002 en-US 73 / 92
8.6.6 Removing sharpener
Pull sharpener back after loosening the
star grip screw and remove to the top.
Set slice thickness immediately to "0".
Fig.106: Removing sharpener
8.6.7 Removing sharpening dust
- Slice thickness to "0"
- Power plug disconnected
- Wear cut-resistant gloves
- Blade cover removed
Press a dry disposable cloth against the
blade surface and slowly wipe away from
the center.
Clean the back of the blade in the same
manner.
Fig.107: Blade cleaning
To Next Page
Loading...
