Bizerba GSP H User Manual

Instruction manual GSP Maintenance
38107010002 en-US 57 / 92
GSP H, GSP H W, GSP H Flex:
Switch off machine.
Remove the AC power plug.
Set slice thickness below "0" (black
marking).
Fig.72: Slice thickness below "0"
8.2 Removing components
Do not place parts on top of each other to avoid mechanical damage.
Remove components as follows:
Tilt the carriage to the outside
Turn out star-grip screw on carriage foot.
Tilt carriage outwards following the direc-
tion of the arrow.
Fig.73: Carriage GSPH

Bizerba GSP H Specifications

General

Type	Slicer
Blade Diameter	330 mm
Cutting Thickness	0 - 24 mm
Material	Anodized aluminum
Operation	Manual
Voltage	230 V
Frequency	50 Hz
Protection Class	IP33