Instruction manual GSP Operation
38107010002 en-US 43 / 92
6.1.4 Weighing operation with GSP H Flex
Slicer GSP H Flex with connected metrologi-
cally approved scale allows sliced product to
be weighed at the same time.
The operation of individual components is
described in detail in the KF II operating in-
structions, chapter 6.
Fig.43: GSP H Flex
6.2 Working with the automatic slicer
WARNING
Rotating blade!
Cut injuries.
– Do not allow yourself to become distracted. Concentrate on the task in
hand and avoid time pressure.
– When slicing, the carriage may only be moved by the handle.
– During operation, do not reach into the path of the carriage.
– Never push product ends towards blade by hand.
CAUTION
There are spikes on the product holder!
Risk of injury.
– Use handle when working with product holder.
– Before you begin slicing, always position the product holder on or be-
hind the product.
To Next Page
Loading...
