Instruction manual GSP Operation
38107010002 en-US 39 / 92
6 Operation
6.1 Working with the manual slicer
WARNING
Rotating blade!
Cut injuries.
– Do not allow yourself to become distracted. Concentrate on the task in
hand and avoid time pressure.
– When slicing, the carriage may only be moved by the handle.
– Do not put your hand underneath the remnant holder plate.
– Never push product ends towards blade by hand.
CAUTION
There are spikes on the product holder!
Risk of injury.
– Use handle when working with product holder.
– Before you begin slicing, always position the product holder on or be-
hind the product.
6.1.1 Slicing long product
Move carriage towards operator.
Use the handle to pull the product holder
outwards and swivel it up.
Fig.33: Preparation of machine
To Next Page
Loading...
