Bizerba SE & Co. KG
Wilhelm-Kraut-Straße 65
72336 Balingen, Germany
38107010002 en
Declaration of conformity for plastic materials with direct food contact
We herewith declare that the materials used in the following machine
Device type: Slicer
Model: GSP H
GSP HD
are in conformance with the general requirements and guidelines of the following directives
and laws in the valid version at the time of issuance of this declaration:
– Regulation (EU) No. 1935/2004 on materials and articles intended for contact with food
– Regulation (EU) No. 10/2011 on materials and articles made of plastic intended for con-
tact with food
For the plastic parts used which, when properly used, can come into contact with food, labo-
ratory tests were performed by a certified test laboratory. Both the total migration and the
specific migrations are below the legal threshold values.
The materials and raw materials used conform to regulation (EU) No. 10/2011.
Specifications on proper use or limitations:
– Type(s) of food that may get in contact with the materials:
Meat, sausage/cold cuts, fish, cheese, vegetables, fruit, bread
– Handling duration and temperature when in contact with food:
Maximum 30 minutes at max. 40°C
– Ratio between the area getting in contact with food and the volume which was used to de-
termine the conformity of the material or article:
6
Functional barriers made of plastic are not used in the specified machine.
Information on suppliers or preliminary suppliers can be provided on request.
Date: 12/7/2018
Signature of manufacturer:
p.p.
Title of signatory:
Ralf Steinhilber
Director Global Food Processing Technology
Bizerba SE & Co. KG
To Next Page
Loading...
